Once you have installed ShipStation Connect, you can then start using most USB scales with ShipStation, as long as they are HID compliant and connected directly to your workstation.
To pull a weight from a USB scale:
Select an order in the Order grid or open the Order's Details.
Click Choose Scale in the Configure Shipment Widget.
Select your scale from the Active Scale drop-down.
The the X in the top right of the Configure Shipment Widget to close.
This will set the scale as the default scale for this user and this workstation.
To pull the weight from the scale for a shipment, click the weight button in the Configure Shipment Widget.
To change the default scale, click the Configure Shipment Widget Preferences link and select a different scale from the Active Scale drop-down menu.
To learn how to use a barcode scan to trigger the weight for a shipment, review the Barcode Scanning article in the Advanced Features section of this help center.
ShipStation is compatible with most USB scales that are HID Compliant and are directly connected to your workstation.
ShipStation recommended models:
In the ShipStation Connect settings screen, there are a few advanced functions for scales.
To see the actions available for a scale, simply hover your mouse over the scale you wish to edit in the list of scales.
Click the pencil icon to edit the name of the scale.
This custom name is what all users on the account will see when selecting a scale for a shipment.
Click the three gears to access the advanced options.
The advanced options allow you to set the scale to its high capacity mode or reset it to factory defaults.
You can also set the following options:
The number of milliseconds ShipStation will wait for a scale reading before it times out.
The second value is the number of milliseconds ShipStation Connect will wait for a scale reading.
You may need to increase both of these values if you have an older model scale, but make sure the first value is always higher than the second value.
The number of milliseconds ShipStation Connect will wait before attempting to read a weight from your scale.
If you have a newer scale that quickly determines weight, you can decrease this value to 150, or even 100. Just make sure this value is less than the 2nd Timeouts value.
The number of times ShipStation Connect will attempt to read a weight from the scale.
If you've decreased the value for the Read Weight, you may need to increase this value.
The index of the first and second bytes of weight data, respectively.
The default values match up with how most scales report data, so only change these values if you have a non-standard scale that reports differently.
These values multiply the first and second bytes of weight data by the specified amount.
Configure Settings For High Capacity Mode changes these values from 1 to 0.1 so large-capacity scales report weights more accurately.
Click the scale icon to read the scale's current weight.
If your scale appears to be reading incorrect weights that are off by a factor of x10 or x100, it may have been set to high capacity mode. Try resetting the scale to its defaults.